skip to primary navigation skip to content
 

 

You are not currently logged in

SPRI library catalogue

View a record

Please note: You are viewing the legacy database of the Scott Polar Research Institute Library catalogue. It is no longer being updated, so does not reliably reflect our current library holdings.

Please search for material in iDiscover for up-to-date information about the library collection.


Record #117847:

Two-dimensional extrusion of crushed ice. Part 1: experimental / Mohamed Sayed, Robert M.W. Frederking.

Title: Two-dimensional extrusion of crushed ice. Part 1: experimental / Mohamed Sayed, Robert M.W. Frederking.
Author(s): Sayed, Mohamed.
Frederking, Robert M. W.
Date: 1992.
In: Cold Regions Science and Technology. (1992.), Vol. 21(1) (1992)
Abstract: Extrusion of crushed ice often occurs during ice indentation and has to be understood in order to determine stress distribution between indenter and ice. Experiments examined two-dimensional flow between two converging flat platens. Local and average normal stresses and displacements were measured. Flow patterns were observed through transparant side walls. Role of platen surface roughness, ice-particle size distribution, and velocity were examined.
Notes:

Cold Regions Science and Technology. Vol. 21(1) :25-36 (1992).

Keywords: 551.32 -- Glaciology.
551.322 -- Ice and snow.
551.326 -- Floating ice.
539.42 -- Ice, tensile strength.
E4 -- Glaciology: physics and chemistry of ice.
SPRI record no.: 117847

MARCXML

LDR 01334naa#a2200000#a#4500
001 SPRI-117847
005 20220926234315.0
007 ta
008 220926s1992####xx#a##|##|###|0||#0|eng#d
035 ## ‡aSPRI-117847
040 ## ‡aUkCU-P‡beng‡eaacr
100 1# ‡aSayed, Mohamed.
245 10 ‡aTwo-dimensional extrusion of crushed ice. Part 1 :‡bexperimental /‡cMohamed Sayed, Robert M.W. Frederking.
260 ## ‡a[S.l.] :‡b[s.n.],‡c1992.
300 ## ‡ap. 25-36 :‡bill., diags., table.
500 ## ‡aCold Regions Science and Technology. Vol. 21(1) :25-36 (1992).
520 3# ‡aExtrusion of crushed ice often occurs during ice indentation and has to be understood in order to determine stress distribution between indenter and ice. Experiments examined two-dimensional flow between two converging flat platens. Local and average normal stresses and displacements were measured. Flow patterns were observed through transparant side walls. Role of platen surface roughness, ice-particle size distribution, and velocity were examined.
650 07 ‡a551.32 -- Glaciology.‡2udc
650 07 ‡a551.322 -- Ice and snow.‡2udc
650 07 ‡a551.326 -- Floating ice.‡2udc
650 07 ‡a539.42 -- Ice, tensile strength.‡2udc
650 07 ‡aE4 -- Glaciology: physics and chemistry of ice.‡2local
700 1# ‡aFrederking, Robert M. W.
773 0# ‡7nnas ‡tCold Regions Science and Technology. ‡gVol. 21(1) (1992) ‡wSPRI-59075
917 ## ‡aUnenhanced record from Muscat, imported 2019
948 3# ‡a20220926